■ Experimental automatic coating machineYK-TBJ-300 ，Using three-roll transfer coating, the substrate surface is coated with a very uniform thin coating, and then automatically dried by drying system, this process can replace the original manual scraping, oven drying operation, and improve the scraping
● High reliability
■
1, automatic walking, automatic winding, coating tension adjustable;
2, equipped with drying system, coating automatic drying;
3, temperature control using PID adjustment system, high control accuracy, reliable work;
4, the use of hot air circulation system, can make the box temperature uniform, not easy to burn pole sheet;
5, with automatic mixing rod, the slurry is more uniform when coating, and the slurry contact part is stainless steel structure;
6, the main drive adopts frequency conversion speed control, wide speed control range, constant and reliable speed, constant torque speed control system, stable performance, high coating accuracy;
7, continuous and uninterrupted coating, winding neatly;
8. Exquisite appearance, sheet metal adopts three-dimensional geometric design, simple and beautiful;
■ Suitable for continuous coating process of positive and negative battery plates
Experimental automatic coating machine |
YK-TBJ-300 |
|
Paste method |
Single-sided continuous |
|
Applicable baseband |
Copper foil, aluminum foil, etc |
|
Pole plate width |
≤300mm |
|
Coating speed |
100-600mm/min (Tunable） |
|
Coating accuracy |
≤±0.003mm |
|
Roll runout |
≤2μm |
|
Roll diameter |
Φ100mm |
|
Unwinding diameter（Max） |
Φ250mm |
|
Winding diameter（Max） |
Φ250mm |
|
Tension control |
5-50N（可調） |
|
Knife positioning accuracy |
The dial indicator shows an accuracy of ±1μm |
|
Drying temperature（Max） |
Room temperature ~150℃ adjustable and hot air circulation |
|
Drying method |
Upper and lower air nozzle blowing (resistance wire heating) |
|
Heating zone |
Zone One, 1.2 meters |
|
Compressed air |
Pressure 0.5Mpa~0.7Mpa, flow rate: 0.04M3/min |
|
Power source |
AC220V / 50Hz |
|
Maximum power |
5kW |
|
Overall dimension |
Length × width × height = 1800×810×1300 |
|
Weight |
1T |
|
